For the time being, although the rapid heating type Intelligent thermostatic water heater It is mainly used for water storage and heating, but there are also "rising stars" in the market, that is, fast heating Electric water heater 。 As we all know, the common types of fast heating electric water heaters are single mode and dual mode. The heating principle is actually similar except that the number of tanks is different. The main heating is through the tank, but it is smaller than the water storage type. Today, I would like to introduce you to a fast heating intelligent thermostatic water heater. As a "novice" of real-time housing, consumers also have many questions about it. Today, I will give you a clear answer.
As the name implies, the premixed type is a fast heating intelligent constant temperature water heater, which has both a water storage tank and instantaneous heating elements, which can not only preheat water, but also realize instantaneous heating. In winter, it can also be directly heated by high-temperature objects in spring, summer and autumn. Although this fast heating electric water heater is preheated in the internal water tank, the preheated water must pass through the instantaneous main body, and the water and electricity are completely separated. In addition, in the whole circuit, the water inlet end and the water outlet end are electrically resistant. Walls and other safety measures completely eliminate "leakage".
The fast heating intelligent constant temperature water heater has two heating modes: spring, summer and autumn. It requires only instantaneous heating. The cold water passes through the heater directly, and the water temperature can reach the set temperature immediately. In winter, you can use the preheating function of the liner, and then heat the water preheated by the liner to the set temperature through the heater. Cold water will continue to enter the liner and mix with the liner. Make sure it is not 24 hours. Hot water is provided at regular intervals, and families no longer need to queue up for bathing.
The power consumption of fast heating intelligent constant temperature water heater needs to be compared and analyzed. First, let's look at just in time types and the expected mixed types. The water temperature is higher in spring, summer and autumn. Under the same power and service time conditions, heating power consumption is almost incomparable.
But winter is different. The water temperature is low. Although the use of instantaneous heating requires the support of large power, the instantaneous thermal efficiency is as high as 97% or higher in the process of converting electric energy into heat energy, which can effectively use the electric energy per kilowatt hour. One kilowatt hour of electricity was wasted. On the other hand, the premixed fast heating intelligent constant temperature water heater must be preheated first and then preheated. The preheating process conforms to the heating principle of the water storage tank. For the water storage type with the lowest energy consumption, the hot water output rate is 70%. It is expected that the hybrid type will lose a lot of heat in the preheating process, and the electric energy will not be completely converted into thermal energy, which is equivalent to wasting electricity, so the thermal type has higher energy efficiency.
