Quick heating type Intelligent thermostatic water heater Descaling, method 3, deep cleaning:

According to the introduction, the water heater needs to be deeply cleaned every three years, and the maintenance hole of the water heater needs to be opened for deep cleaning. Therefore, in order to ensure safety, it is better to ask a professional maintenance worker to clean the water heater. Many people may think that the water from a water heater that has been used for many years and has never been cleaned at home is still very clear, and that there is no scale in it. In fact, such a water heater has more scale and other dirt, which needs cleaning urgently.

In the fast heating intelligent thermostatic water heater, the hot water nozzle is at a high place, about 2cm away from the top of the tank, while the cold water nozzle is at a low place, about 3cm away from the bottom of the tank. When using the water heater at ordinary times, the cold water pipe is always filled with water. The hot water is squeezed to the top by the cold water and flows out along the hot water pipe. The scale is deposited at the bottom of the tank and will not be discharged through the hot water pipe.

Instant electric water heater And quick heating Electric water heater Both are important types of electric water heaters, which are similar in appearance but slightly different in fact. When consumers are shopping.

Difference between instant electric water heater and instant electric water heater I: heating principle

Instant electric water heater is a kind of water heater that can quickly heat flowing water through electronic heating components, and can control the water temperature, flow rate, power, etc. through the circuit to make the water temperature reach the temperature suitable for human bathing.

In the high power state, the fast heating electric water heater uses a heating body with strong thermal conductivity to convert electric energy into heat energy, which then transfers heat to the water. The water can be quickly heated by using powerful heat.

Difference between instantaneous electric water heater and instantaneous electric water heater II: different power

In order to achieve the goal of fast heating speed, that is, the power of the thermal electric water heater is usually more than 5000W. However, the power is too large, and the requirements for the installation circuit are also very strict. It is difficult for ordinary household lines to bear the power of more than 7000W, and the safety problem is also a great hidden danger. This is also an important reason why the market share of the fast heating intelligent constant temperature water heater still cannot compare with the traditional water storage electric water heater.

The power of fast heating electric water heaters is mostly between 3000W and 5000W, and the installation conditions are lower than that of instant heating electric water heaters. Users can install and use them without refitting household meters, circuit wiring, etc.

The third difference between instantaneous intelligent constant temperature water heater and instantaneous electric water heater: heating speed

Instant electric water heater can start heating in a few seconds, so it has the advantage of instant heating without waiting.