1. Nozzle maintenance method: when using the nozzle, if it is found that the water spraying is not smooth or blocked, remove the nozzle, unscrew the screw in the middle of the nozzle cover with a screwdriver, remove the assembly cover (remember the position), and clean the debris on the internal surface with a waste toothbrush. After cleaning, install the assembly covers in order, and pay attention to the alignment to prevent affecting the use effect of the nozzle.
2. Tank maintenance method: to ensure instant heating Intelligent thermostatic water heater Safety in use and tank life. If the tank is not used for a long time, the water in the tank can be drained through the safety valve. First close the tap water inlet valve, and then turn the instant electric Electric water heater Pull the mixing valve to the hot water, and then pull the safety valve handle upward to the horizontal position. At this time, the water in the tank of the hot intelligent thermostatic water heater will flow out through the pressure relief port of the safety valve and flow to the sewer through the discharge pipe.
3. The manufacturer of instantaneous intelligent thermostatic water heater shall regularly check, clean and maintain it. Instant intelligent thermostatic water heater is generally cleaned once every 6 to 8 months to reduce emissions of harmful substances and save gas
4. When not in use for a long time, turn off the power supply and drain the water stored in the tank; If the water output of the shower is reduced, the blocked sundries should be cleared in time to ensure the smooth outlet, which is helpful to extend the service life of the instant electric water heater. If the instant electric water heater is not used for a long time, the power plug should be pulled out first to keep the instant electric water heater in a power off state.
When taking a bath in winter, there is no more headache than that the water is cold in the middle of the bath, or the water temperature is hot and cold, which can only be finished in a hurry, and it is easy to catch a cold. Therefore, it is particularly important to choose a suitable instantaneous intelligent constant temperature water heater.
Instant intelligent constant temperature water heater is small in size, fast in heating, stable in water outlet temperature, free from scale formation, and water output is not controlled by capacity, which can continuously produce hot water and save electricity.
Increase the temperature of the water needed immediately, how much to wash, how much to burn, no preheating, no preheating heat loss; Put as much water as you need, and no surplus water will take away a lot of heat. Unlike the traditional instantaneous intelligent thermostatic water heater, which has to heat a whole barrel of 60 liters or 80 liters of water before use, it causes waste of time and energy.
Instant intelligent thermostatic water heater uses water to control electricity. When the tap of the hot water supply system is turned on, the water heater generates heat instantly. After the faucet is turned off, the water heater will stop operation immediately, and the faucet switch will control the water heater synchronously. The water storage type electric water heater heats and dissipates heat, which is time-consuming and power consuming.
