Use instant heating Intelligent thermostatic water heater The security of is very important! Currently, all instant Electric water heater Our investment brands all said that their products are safe. Some use leakage protection technology, some use water and electricity separation technology, as well as crystal tube heating technology, separation wall, resistance wall technology, etc.
At present, there are two main solutions in the industry: power-off method and charging water resistant method.
Shutdown method: The main reason is that a new shutdown method has been added. When the external water heater is abnormally grounded, all power connections, including the live wire, the neutral wire and the ground wire, will be cut off quickly, so that the bathing environment is completely without power, thus achieving the purpose of safety. This principle is mostly used for water storage leakage, such as the leakage protection we see.
Water filling resistance method: when the electric leakage of the instantaneous intelligent constant temperature water heater does not cut off the power supply, but adds a section of plastic pipe at the inlet and outlet of the water heater, it is equivalent to installing a series resistance between the human body and the water. Leakage phenomenon, it can share most of the voltage, so that the voltage borne by the human body is reduced to below 12V, and there is no feeling of electric shock.
Separation of water and electricity: In contrast, due to the high requirements for the circuit, most of the thermal intelligent thermostatic water heaters use the water and electricity separation technology of heating elements, which is equivalent to the use of the first two reverse electricity technologies. At present, this is a safe method. By selecting the material of the water pipe in the electric water heater and determining the diameter and distance of the water pipe, an "electric isolation wall" is formed. When the electric water heater is powered on, even if the water in the heating body is charged, the resistance of the water itself will decay when passing through the "separation wall" to achieve the purpose of electrical isolation, and then equipped with an air switch and grounding wire to manufacture the water heater. It is conductive, but not conductive. It really realizes the complete isolation of water and electricity, and also protects the external installation environment. This is real security!
For small units, space is very valuable. Large instant intelligent thermostatic water heater can basically occupy the toilet seat. Therefore, the volume of the water heater is also particularly important.
1. General instantaneous intelligent constant temperature water heaters are divided into wall mounted and floor mounted, and the volume of wall mounted is generally 40-100L. The volume of floor type is larger than that of wall mounted type, while that of floor type is more than 100L.
2. Instant intelligent thermostatic water heater is small in size, generally about 250 * 130 * 400mm.
When it comes to instantaneous intelligent thermostatic water heater, in fact, it has a development history of more than ten years. It not only completely discards the functional defects of the previous two generations of electric water heaters, but also perfectly integrates and enhances their advantages, fully meeting the needs of users in the bath process. Comfortable and satisfied. The instantaneous intelligent constant temperature water heater supports rapid heating/heat storage dual mode heating, with low installation conditions, large water output, rapid heating, and free from weather when used, and unlimited number of users.
