1. Nozzle maintenance method: when using the nozzle, if it is found that the water spraying is not smooth or blocked, remove the nozzle, unscrew the screw in the middle of the nozzle cover with a screwdriver, remove the assembly cover (remember the position), and clean the debris on the internal surface with a waste toothbrush. After cleaning, install the assembly covers in order, and pay attention to the alignment to prevent affecting the use effect of the nozzle.

2. Tank maintenance method: to ensure electrical integration Intelligent thermostatic water heater Safety in use and tank life. If the tank is not used for a long time, the water in the tank can be drained through the safety valve. First close the tap water inlet valve, and then turn the instant electric Electric water heater Pull the mixing valve to the hot water, and then pull the safety valve handle upward to the horizontal position. At this time, the water in the tank of the instant electric water heater will flow out through the pressure relief port of the safety valve and flow to the sewer through the discharge pipe.

3. The manufacturer of integrated intelligent thermostatic water heater shall conduct regular inspection, cleaning and maintenance. Domestic gas-fired instantaneous electric water heaters are generally cleaned once every 6 to 8 months to reduce emissions of harmful substances and save gas

4. When not in use for a long time, turn off the power supply and drain the water stored in the tank; If the water output of the shower is reduced, the blocked sundries should be cleared in time to ensure the smooth outlet, which is helpful to extend the service life of the integrated intelligent thermostatic water heater. If you do not use the integrated intelligent thermostatic water heater for a long time, you should first unplug the power plug to keep the integrated intelligent thermostatic water heater in a power off state.

For families that don't often use hot water, we recommend that you start to power on the heater one hour before taking a bath, and then turn it off after taking a bath. Normally, you should turn off the water heater. In this way, the electric energy consumption can be kept in a less state, thus saving the electric charge to a large extent.

For families that only use the water heater for bathing every day, and the use of hot water is not large, we recommend that the water heater be turned on about an hour before bathing.

For frequent use, we recommend that the integrated intelligent thermostatic water heater be kept open all the time. The temperature of hot water can be adjusted according to the frequency of use and the amount of hot water used. If the amount of hot water used is small, the temperature can be lowered a bit, and if the amount of hot water used is large, the temperature can be raised a bit.

In case of continuous use (generally referring to commercial users such as hair salons), the integrated intelligent thermostatic water heater can only be kept open, but the temperature of hot water can also be properly adjusted according to the number of guests. So as to save electricity costs to a greater extent.