Although the solar water heater saves money, sometimes it can not solve our water problem. At this time, a high-power device appeared, which is the most used Instant electric water heater It not only brings convenience to our life, but also brings some troubles to those who use Xiaobai. But so many problems can't be explained at the moment. Today, we will talk about the hot mode in detail Intelligent thermostatic water heater The heating suddenly stopped. What's the matter.

1. There is a problem during installation. One of the two ports of the water heater is for water inlet and the other is for water outlet. Normally, it can be heated as long as the water is supplied normally, and the speed is very fast. This is also a major advantage of the instant heating type. But if we connect the connectors at both ends reversely, it can't be heated. Even if you heat it for 24 hours, it has no effect at all. Our solution is also very simple. Turn off the water heater, and then change the position of the water pipes at both ends. You can rest assured that the water heater will not be damaged if you connect it incorrectly.

2. There is a phenomenon that we do not know whether we have noticed. No matter how people clean their mouths and brush their teeth, their teeth will be black and yellow. The reason for this phenomenon is that the water quality is different in each region. In fact, the water heater will also be affected by the water quality during use. If there are too many impurities in the local water, the water inlet of the water heater will be blocked or even directly blocked if it is used for a long time. As we all know, the instantaneous intelligent constant temperature water heater is automatically heated by induction. Now the induction device is closed, and the signal to be heated cannot be received, so it will not be automatically heated. If you want to solve this problem, you can use the above mentioned backflow inlet and outlet to flush the water. If you can't do it, you can only replace the sensor. If you want to completely solve this problem, you probably need to move home.

3. The overtemperature protector fails or your water heater does have overtemperature, but you haven't found it. What we need to do is to reset the device to see if it can be heated normally. If it is normal, it means that there has been an overtemperature previously. If it still cannot be heated and the overtemperature is displayed, the device needs to be replaced.

4. Your instant style Electric water heater If there is a short circuit, it means that the electric water heater has a self-protection device. If this phenomenon occurs, normal operation cannot be carried out. We need to check it and then repair it.