Instant type Intelligent thermostatic water heater It is a kind of water heater that can quickly heat flowing water through electronic heating elements, and can control water temperature, flow, power, etc. through circuits, so that the water temperature can reach a temperature suitable for human body bathing. Heat immediately after turning on, without waiting, and usually start heating in a few seconds.
During installation, the manufacturer must use a special shower. Under normal working conditions, the instantaneous intelligent thermostatic water heater can adjust the water flow to control the water temperature. Make the water temperature reach the predetermined effect;
To ensure safe use Instant electric water heater In addition to dry burning without water, a pressure sensor activation switch with water flow as the signal is installed at the cold water inlet. The diaphragm of the pressure sensor activated switch has limited ability to withstand pressure. And can not withstand pressure for a long time, so generally Instant water heater Listed as the front label.
Instant type Electric water heater It can be used at any time. The instantaneous intelligent constant temperature water heater is very fast, so its power is generally between 4000 and 8000 watts. One of our most popular automatic intelligent constant temperature models can be automatically adjusted, so it needs at least 7 kilowatts in three or nine days in winter to ensure sufficient water and comfortable temperature.
The cleaning time of instantaneous intelligent thermostatic water heater is usually 2 to 3 years. Frequent uncleanness can easily lead to scale attachment, leakage of heating pipe, and even the possibility of explosion. When using the water heater, we can't ignore cleaning the water heater. Before cleaning the water heater, cut off the power supply and water, and then open the cold and hot water pipes of the water heater with a wrench. After removal, the water in the water heater will not flow out.
1. One row, two punches and three screws
This technique is mainly used for instant intelligent thermostatic water heaters with special drain outlets. First, you need to use a special tool to unscrew the nut of the sewage outlet at the bottom of the water heater; Then connect the cold water pipe to the hot water outlet, and open the cold water angle valve to make the cold water flow back to the internal tank through the hot water pipe, so as to remove the dirt.
2、 First removal, second exhaust, triple installation
This method is also very simple. Remove the connector of the hot water pipe, and the water in the inner tank will flow out naturally through the pressure relief valve. Wait a moment, when no more water flows out of the valve, the scale and flocs in the internal water tank will be discharged. However, this method cannot ensure that the scale in the tank is completely discharged, and a small amount of sewage may remain at the bottom of the inner tank that cannot be discharged.
3、 One check, two checks, three plug-ins
This is mainly applicable to users who do not know much about their own instant intelligent thermostatic water heaters. First, check whether there is dirt residue and leakage at each interface of the water heater. If the interface is found to be dirtier than the box and water pipe, it must be that there is too much scale and the accumulated water in the water tank remains. If you cannot complete the above sewage treatment process alone, it is recommended to seek professional help.
