integrate Intelligent thermostatic water heater The working principle of is heating after the water is used up, so the thermal efficiency is to buy Electric water heater Important standards. If the thermal efficiency of the water heater heater is low, problems such as long waiting time for bathing, limited number of people, and long-time repeated heating are likely to occur. Especially in winter, if the hot water is heated slowly, it will bring us many uncomfortable bathing experiences.

The integrated intelligent thermostatic water heater is equipped with a fast heating engine, which can realize fast preheating and "bathing" as required. In summer, spring and autumn, you can clean it immediately, so you don't have to wait for a bath; Even in cold winter, you only need to heat for 3 to 8 minutes to enjoy a comfortable bath, which is very effective and comfortable to use. Combined with unique fast heating technology and thermal cycle technology, the capacity of the water heater has increased by 8 times, which can provide us with longer battery life. Even if more than one person takes a bath in a family, it can completely show that the whole family is doing the dishes in a relay way, and there is no limit on the number of people!

Check whether the water heater can save energy

There is no doubt that energy conservation is the most important issue when we buy products, and it is also the main standard to measure the quality of electric water heaters. However, the current electric water heater products on the market generally have the problem of high energy consumption, because the heating speed is not fast enough, each heating takes more than 20 minutes, and the power consumption is large. And it needs long-term electrified insulation, and the additional power consumption is very large.

The integrated intelligent thermostatic water heater supports bathroom installation and solves the problem of pipe consumption. At the same time, the ultra energy-saving heating technology can realize instant heating. Even in the coldest winter, it only takes 3-8 minutes to reach the limit of heating. There is no need to keep warm for 24 hours. The heating speed is fast, power consumption is low and waste is low. In addition, the automatic shutdown standby design requires no operation for 30 minutes. This product is more energy-saving than the traditional water storage electric water heater, with an average annual power saving of about 500 kWh, accounting for 46% of the energy-saving index.