The instant heating type Intelligent thermostatic water heater It can be opened and heated in spring, summer and autumn, and preheated for 3 to 8 minutes in winter, so that hot water can be supplied at a suitable temperature, which is very fast and convenient to meet the fast-paced life needs of modern people.
Energy saving is important
As the preheating time of the instant intelligent thermostatic water heater is very short, there is almost no heat loss during preheating. On, off when not in use. Use as much water as possible, and there is no storage water heater. The energy consumption of surplus hot water is really energy saving, electricity saving and water saving. Generally speaking, the instantaneous intelligent thermostatic water heater is different from the traditional Electric water heater It can save 15% - 30% power. In the case of water and electricity shortage, it is undoubtedly very practical to focus on promoting this product. This is also a factor that consumers should consider when choosing instant intelligent thermostatic water heaters.
Anti electricity and environmental protection priority
For electric water heater products, people are most worried about leakage. In order to fully ensure the power consumption of consumers, quick heating intelligent thermostatic water heaters also generally pay attention to design. Ten times of anti leakage protection and "physical electrical shielding" technology effectively ensure your safe use. All products have passed 3C compulsory certification and "international standard product" certification! Let you worry!
Intelligent constant temperature, constant water temperature, comfortable to use
The instantaneous intelligent constant temperature water heater can be set independently at each angle. No matter how the environmental factors (such as water pressure fluctuation) change, its unique "4G Turbo Frequency" technology can automatically adjust the heating power and the size of the water outlet. The outlet temperature will always be set to constant temperature to effectively ensure the comfort of bathing. No matter how many people take a bath, as long as the water temperature is adjusted at the beginning, it will maintain a constant temperature and constant current, and it will be refreshing and comfortable.
After completing the previous preparations, we can start the real cleaning work. First of all, we close the two triangle valves below the instant intelligent thermostatic water heater to prevent the water in the instant intelligent thermostatic water heater from flowing out by itself. Then, unscrew the nut of the cold water pipe of the instant intelligent constant temperature water heater to let the water in the instant intelligent constant temperature water heater flow out of the cold water port. This drainage process is relatively long. Generally speaking, the water storage type instant intelligent constant temperature water heater that we usually use in our home may take about 40-60 minutes if it is full of water, so I said earlier that it takes a little time to clean the instant intelligent thermostat and operate its own water heater.
After the water in the instantaneous intelligent thermostatic water heater is drained, we are ready to start cleaning the inner wall of the outlet of the instantaneous intelligent thermostatic water heater. Take a rubber tube, close the cold water port, connect one end of the rubber tube to the faucet, and the other end to the hot water port of the instant intelligent thermostatic water heater. Fill the tank and close the hot water port. At this time, the instant intelligent thermostatic water heater is full of cold tap water. We can soak the tap water for about half an hour, and then put it into the instant intelligent thermostatic water heater according to the previous method. Repeat several times until the tap water discharged from the cold water outlet has no obvious impurities!
