Primary low-end: gear adjustment technology

integrate Intelligent thermostatic water heater Adjust the temperature by adjusting the power of the gear. This simple product only has three gear adjustments, and the slightly better one can be set to seven to nine gear adjustments. Simple, low-cost gear adjustment and inaccurate temperature control usually require increased water to reach the required temperature; Therefore, it not only wastes water, but also wastes electricity, and does not save energy. When the voltage, water pressure and water inlet temperature fluctuate, it is still very cold and the comfort is poor.

Low order: stepless temperature control technology

The stepless temperature regulation technology of integrated intelligent thermostatic water heater uses a microcomputer to divide the output power of the integrated intelligent thermostatic water heater into numerous pinions to accurately control the water temperature of the water heater. Generally, there are 20 × 30 gears, and the 30 gear is relatively moderate. The adjustment of about 1 degree for each gear can not only better meet the requirements, but also not too troublesome. More accurate temperature regulation and higher bath comfort. This is a statically controlled temperature. The fluctuation of voltage, water pressure and water inlet temperature will still be very cold, and the comfort will be limited.

Intermediate: intelligent frequency conversion constant temperature technology

The integrated intelligent thermostatic water heater technology is based on the dynamic temperature data set by the water inlet temperature sensor, water outlet temperature sensor and flow sensor, and the microcomputer can adjust the power at any time through the thyristor to achieve a constant water outlet temperature when the voltage, water pressure and water inlet temperature fluctuate.

Temperature regulation is more accurate, and the temperature can be dynamically controlled. When the voltage, water pressure and inlet water temperature fluctuate, the water temperature remains constant, and the bath is more comfortable. When the water volume is large and the water temperature is low in winter, when the power supply of the water heater is exhausted and the water temperature cannot reach the set temperature, the water heater cannot adjust the water volume to a constant temperature.

High end: intelligent variable frequency constant temperature technology

The intelligent variable frequency constant temperature technology is a kind of microcomputer, which can set the dynamic temperature data according to the inlet water temperature sensor, outlet water temperature sensor and flow sensor, adjust the power at any time through the thyristor, and achieve the effect of constant outlet temperature at any time through the variable frequency motor. Accurate temperature regulation, dynamic temperature control, constant outlet temperature at any time and good bath comfort.