Large brands in the industry can often achieve one key setting and intelligent constant temperature. After the temperature is set, the high-precision temperature sensor and flow sensor will transmit the signal to the microcomputer control board, and the heating power will be adjusted through the silicon controlled rectifier, so that the water temperature is constant, no longer hot and cold.

1. Also consider installation conditions

The installation conditions must also be considered. Sometimes the safety accident of the water heater may also be caused by improper installation.

A. The place where water and electricity can be connected shall be installed and there shall be floor drain to ensure smooth drainage.

B. Hanging instant heating type Intelligent thermostatic water heater The load-bearing capacity of the wall should be considered, and products with small size and light weight should be purchased as far as possible.

C. Instant intelligent thermostatic water heater is generally powerful, and special wires of 4-6 mm2 or more must be reserved for the decoration of new bathrooms and kitchens.

D. Use national standard wires produced by regular manufacturers to ensure circuit safety.

2. Consider brand

In Select Instant electric water heater At that time, consumers should never trust the fake water heaters in some small supermarkets. They cut corners to steal other people's zhuanli technology. Although the price is very low, it is not guaranteed to be used.

In addition to focusing on scientific research and development and constantly innovating technology, major brands in the industry are more rigorous in product quality testing, and strive to bring more effective protection to consumers.

The heating element detection requirements specified in the national standard are: under 1250V high voltage, the surface leakage current of the heating element is less than 5mA; However, some major brands in the industry have increased the detection voltage to 1800V and require the surface leakage current to be less than 1mA, which is much more stringent than the national standard.

Choosing a big brand in the industry can not only guarantee the safety performance, but also reduce the number of repairs caused by product quality problems. Even if there are after-sales maintenance or installation problems, there are more professional personnel to provide service and warranty for you, so you don't have to worry about after-sales.