True constant temperature means that the water flow regulating device is set at the water inlet to integrate Intelligent thermostatic water heater According to the change of water flow, adjust the intake volume and air intake volume to achieve the purpose of advance adjustment. At the same time, temperature sensors are set at the water inlet and outlet to track and correct the temperature, so that the temperature can completely fluctuate within the set range. Since the fluctuation is small and the duration is short, it will not cause discomfort to users.
When it comes to integrated intelligent thermostatic water heater, it has a history of more than ten years, which not only abandons the previous two generations Electric water heater It also integrates and improves their advantages, fully meeting the user's comfort and satisfaction in the bath process. The integrated intelligent thermostatic water heater supports rapid heating/thermal storage dual-mode heating, has low installation conditions (usually 3000-5000W power), large water output, rapid heating, is not affected by the weather during use, and has no limit on the number of users.
The integrated intelligent thermostatic water heater has three guarantees, namely, the three proof electric barrier wall, the fast heating engine heating technology, and the multiple leakage protection device, to ensure the real safety of use. Low power consumption technology, microcomputer water temperature monitoring, better protection of internal and external temperature balance, avoid unnecessary heat preservation power consumption, save energy and energy, save money and worry. For small houses, space is particularly valuable. A large water storage water heater can basically occupy a toilet seat, so the volume of the water heater is also particularly important.
1. Generally, water storage water heaters are divided into wall mounted and floor mounted, and the volume of wall mounted water heaters is generally 40-100L. The volume of floor type is larger than that of wall mounted type, while that of floor type is more than 100L.
2. The integrated intelligent thermostatic water heater is small, generally about 250 * 130 * 400mm.
There are many "pseudo thermostatic water heaters" on the market that can not actually achieve constant temperature under constant temperature, which are actually "simulated constant temperature". This water heater is usually equipped with a temperature sensor at the water outlet. When the water temperature changes, it starts to adjust. The mechanical transmission device is also far less rapid than the proportional valve, and can not accurately match the air volume and gas volume, and the water temperature will still be hot and cold. In fact, this method is to process after the temperature changes, with a delay of several seconds.
The integrated intelligent thermostatic water heater has a temperature insulation of 45 degrees, which can effectively avoid repeated boiling. The constant water temperature ensures that hot water can be used at any time. The water cyclone inlet system has a large hot water output rate and can continuously provide hot water supply. And creatively combine these two technical points perfectly, make an appointment for temperature and bath time in advance, and start washing immediately without waiting.
