How do we choose integration Intelligent thermostatic water heater How many liters? If economic conditions permit, naturally, the larger the number of liters, the better; However, if the area is warm in winter or the hot water is only used for bathing (kitchen and bathroom faucets are not required), products no less than 8L can be selected; If you want to supply hot water for the whole house, the 12L integrated intelligent thermostatic water heater is your best choice.

There are two kinds of gas used in families, one is bottled LPG, the other is pipeline natural gas, such as some villages in cities or old urban areas. Since there is no natural gas pipeline laid during building construction, only bottled LPG can be used. It should be noted that the two gases are not the same, and the oxygen mixing ratio is also different when burning, so the manufacturer will provide both petroleum gas and natural gas versions for consumers to choose. When shopping, consumers should first determine the type of gas used in their homes, and then select suitable products.

If the integrated intelligent thermostatic water heater is not used for a long time, the maintenance method is as follows: first, unplug the power plug to make the water heater in a power off state. This is mainly for safety. If it is not used for a long time, the water heater will be in a working state. This will lead to accelerated aging of parts in the water heater and shorten the service life of the water heater. Secondly, if the water heater is powered on, it must consume electricity, which is an unnecessary waste.

Then drain the water in the tank so that the tank of the water heater is not filled with water. This can effectively reduce the pressure on the liner and extend the service life of the liner. (See question 10 for the method of emptying the water in the tank). Thirdly, if possible, the water heater can be wrapped with plastic bags to prevent dust and moisture.

Each integrated intelligent thermostatic water heater will have the parameter of rated hot water production capacity. This parameter refers to the water output per minute of the water heater on the premise of ensuring that the water temperature is increased by 25 ℃. If the water temperature is 20 ℃, a 10L integrated intelligent thermostatic water heater can produce 10L of water per minute when the outlet water temperature is 45 ℃. In short, the larger the liter, the better the heating capacity of the water heater.