True constant temperature means that the water flow regulating device is set at the water inlet to integrate Intelligent thermostatic water heater According to the change of water flow, adjust the intake volume and air intake volume to achieve the purpose of advance adjustment. At the same time, temperature sensors are set at the water inlet and outlet to track and correct the temperature, so that the temperature can completely fluctuate within the set range. Since the fluctuation is small and the duration is short, it will not cause discomfort to users.

There are many "pseudo thermostatic water heaters" on the market that can not actually achieve constant temperature under constant temperature, but are actually "simulated constant temperature". This water heater is usually equipped with a temperature sensor at the water outlet. When the water temperature changes, it starts to adjust. The mechanical transmission device is also far less rapid than the proportional valve, and can not accurately match the air volume and gas volume, and the water temperature will still be hot and cold. In fact, this method is to process after the temperature changes, with a delay of several seconds.

The integrated intelligent thermostatic water heater has a temperature insulation of 45 degrees, which can effectively avoid repeated boiling. The constant water temperature ensures that hot water can be used at any time. The water cyclone inlet system has a large hot water output rate and can continuously provide hot water supply. And creatively combine these two technical points perfectly, make an appointment for temperature and bath time in advance, and start washing immediately without waiting.

There are also full stop and carbon monoxide over limit prevention devices, which can monitor and adjust in real time to ensure full combustion. Child lock protection, continuous combustion shutdown protection, 48 ℃ safety lock function (under normal mode, the set temperature during water use can be adjusted between 35 ℃ and 37 ℃~48 ℃ at will. If hot water higher than 48 ℃ is required, the water valve must be closed to adjust), to prevent accidental burns, etc.

It is suggested that citizens should consult shop assistants when purchasing integrated intelligent thermostatic water heaters. One of the important devices is the proportional valve. When the gas pressure increases, the gas supply valve will be automatically turned down. When the gas pressure decreases, the gas supply valve will be opened up to maintain the stability of the gas supply. At the same time, the proportional valve will also increase or decrease the gas supply according to the set water temperature. Whether the machine is equipped with a water flow sensor, or ask whether it is water air dual regulation. Only the water and gas double regulating water heater is a real thermostatic water heater.