Instant type Intelligent thermostatic water heater , refers to immediate heating Electric water heater An electric water heater that can keep the outlet water temperature basically constant with the temperature set by the user when the inlet water flow, inlet water temperature and power supply voltage change. Judging from the daily use function, the outlet water temperature of a real thermostatic water heater in a family's multi-channel water supply system is consistent with the set temperature no matter how the water flow and pressure change.
The water flow switch adopts an infrared water flow sensor to measure the inlet water flow and inlet water temperature, transmit the data to the microcomputer for data processing, subtract the inlet water temperature from the set water temperature, and timely adjust the output power of the heating system in combination with the inlet water flow and outlet water temperature, so as to truly achieve the goal of accurate constant temperature. When the water supply stops suddenly and it is too late to close the water valve, no water flow signal will be generated in case of backflow in the water path, so as to prevent dry burning.
No magnetic induction device, no magnetic field dry winding, longer service life; In addition, infrared ray has antibacterial and anti-virus functions, which can effectively purify water and help skin health. It is suitable for water flow starting of various water heaters. Insulating material, reliable and safe. The electric water heater is divided into speed heating type, instant heating type and water storage type. Among them, the quick heating and water storage electric water heaters still adjust the ratio of hot and cold water through the water mixing valve to adjust the bath temperature suitable for themselves.
The instantaneous intelligent constant temperature water heater does not mix cold water. The principle of realizing constant temperature is to set an infrared water flow sensor at the water inlet of the instantaneous thermoelectric water heater heating system to detect the water flow entering the heating system, and convert it into an electrical signal that is input to the computer chip processor of the control system. There is a temperature detection sensor at the water outlet, The detected temperature data results will also be input to the main board processor. After calculation by the processor, the heating system will be controlled according to the results, and the heating power will be adjusted to achieve a constant outlet water temperature.
The instantaneous intelligent thermostatic water heater adopts movable connection. The interface fixing card and the water inlet pipe are fixed by stamping. There is no welding point and the pipe is not damaged. By welding the fixed interface, it is easy to crack and leak water during thermal expansion and cold contraction, and the welding point is easy to corrode and leak water; The round fixed card and the sealing silicone ring are fixed on the infrared water flow sensor by the screw cap, so that the fixed card and the infrared water flow sensor horn shaped interface extrude the convex sealing silicone ring, tightly hold the outer wall of the water inlet pipe for sealing, and the water inlet pipe can freely shrink when the temperature changes, without damaging the barge interface and without water leakage
