Smart life - hot touch!

400-0760-081

 Inside banner
Your current location: home page >> News Center >> technical knowledge

Integrated intelligent thermostatic water heater manufacturers talk about the temperature control mode of water heaters

Integrated intelligent thermostatic water heater manufacturers talk about the temperature control mode of water heaters

Date of issue: 2019-03-26 Author: Wanmite Click:

Integration Intelligent thermostatic water heater There are two kinds of temperature control for the integrated intelligent thermostatic water heater of China Merchants: one is called overtemperature protection: when the outlet water temperature reaches 55 ℃ or 60 ℃, the computer automatically controls the heating system and stops heating, and when the outlet water temperature drops below the rated temperature, it will resume heating again; The other is called dry burn protection: when the water outlet temperature or heating temperature reaches 95 ℃ or above, the temperature controller automatically cuts off the power supply and stops heating. When the water outlet temperature or heating temperature drops below the rated temperature, it will automatically or manually recover.


When the integrated intelligent thermostatic water heater is turned on, press the temperature adjustment button, and the digital display flashes to display the last set temperature, such as the 75 degrees you mentioned. Each time the temperature adjustment button is pressed, the set value will change by one gear according to a certain range, which can generally be changed circularly between 30 and 75 degrees. For example, the original 75, press once to change it to 30 degrees, press again to change it to 35 degrees, press again to change it to 40 degrees. Generally, those controlled by microcomputer have power failure memory function. Even after power failure and power transmission, the set temperature will still be remembered and kept, and no further adjustment is necessary. Water heater refers to a device that can increase the temperature of cold water into hot water within a certain time through various physical principles.

 Integrated intelligent thermostatic water heater manufacturer

The heating temperature controller of the integrated intelligent thermostatic water heater is installed on the temperature controller and temperature limiter of the water heater. Its control principle is as follows: the temperature controller is generally set in a metal tube, and the metal tube is inserted into the water to sense the temperature of the water. The control temperature of the temperature controller is generally about 70 ℃, which can not only ensure a large water storage capacity of the water heater, but also prevent the wrong operation from scalding due to high water temperature.


The set value of the temperature limiter is slightly higher than the high control temperature, generally about 80 ℃. When the heating temperature reaches the set value, the power supply will be cut off immediately to prevent the failure of the temperature controller, resulting in continuous heating and accidents.


An automatic switch for temperature control will trip when the outlet water temperature reaches the rated temperature (generally 60 ℃ and 85 ℃), and will recover when the outlet water temperature drops below the rated temperature. The bottom of the temperature controller must be coated with silicone grease. The role of silicone grease is to conduct heat, so as to ensure rapid heat transmission and timely take-off of the temperature controller.


Website: //zaogsheng.cn/news/440.html

key word: Instant intelligent thermostatic water heater manufacturer , Fast heating intelligent constant temperature water heater manufacturer , Integrated intelligent thermostatic water heater manufacturer

Recent browsing:

National Service Hotline

400-0760-081

Address: No. 333, Dongfeng Avenue South, Dongfeng Town, Zhongshan City

 1551403635136651.png

Scan QR code to browse mobile phone station